Product ID:INTERLAC WHITE SILICONE ALKYD, CMB000
MSDS Date:01/22/1991
FSC:8010
NIIN:00N021862
MSDS Number: BLWTN

INTERNATIONAL PAINT INC

2270 MORRIS AVE
UNION, NJ 07083
US

Emergency Phone: 713-682-1711

Info Phone: 713-682-1711

Cage: 26351

INTERNATIONAL PAINT INC

HOUSTON, TX 77091 US

Telephone: 800-589-1267/800-854-6813

Cage: 26351

7.0@20C

CAS: 8032-32-4

RTECS: OI6180000

Fraction By Weight: 20-25%

OSHA PEL 300 PPM;400 PPM STEL

ACGIH TLV: 300 PPM

15@20C

CAS: 8030-30-6

RTECS: SE7555000

Fraction By Weight: 5-10%

OSHA PEL 300 PPM (MFR)

ACGIH TLV: 300 PPM (MFR)

2.0@20C

CAS: 64742-88-7

Fraction By Weight: 1-5%

OSHA PEL 100 PPM (MFR)

ACGIH TLV: 100 PPM (MFR)

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYES: CAN CAUSE IRRITATION WITH
REDNESS, TEARING & BLURRED VISION. SKIN: IRRITATING. MAY RESULT IN
DERMATITIS. INHAL: IRRITAITON OF RESPIRATORY TRACT. HEADACHE AND
DIZZINESS AND UNCON. INGEST: GASTROI NTESTINAL IRRITATION, NAUSEA,
VOMITING,DIARRHEA. CHRONIC: OVEREXPOSURE TO, AND MISUSE OF SOLVENTS
HAS (EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:HLTH HAZ: BEEN LINKED TO PERMANENT BRAIN AND
NERVOUS SYSTEM DAMAGE.
Medical Cond Aggravated by Exposure:SKIN AND RESPIRATORY CONDITIONS.

First Aid:EYES: FLUSH IMMED WITH COPIOUS QUANTITIES OF WATER FOR AT
LEAST 15 MIN. GET MED ATTN IMMED. SKIN: REMOVE CONTAMINATED
CLOTHING, WASH SKIN WITH PLENTY OF SOAP AND WATER. LAUNDER CLOTHES
BEFORE REUSE. I NHAL: REMOVE TO FRESH AIR. GIVE ARTF RESP IF
NEEDED. GET MED ATTN. INGEST: CALL PHYS IMMED TO DETERMINE WHETHER
OR NOT TO INDUCE VOMITING.

Flash Point:81.0F,27.2C
Lower Limits:1.0%
Extinguishing Media:CO2, DRY CHEMICAL.
Fire Fighting Procedures:NIOSH/MSHA APPRVD SCBA & FULL PROT EQUIP.
SMOTHER FLAMES W/1 OF ABOVE EXTING MEDIA. H2O MAY BE USED TO COOL
UNOPENED CONTR, BUT MUST NOT BE USED (SUPDAT)
Unusual Fire/Explosion Hazard:CONTAINS FLAMMABLE SOLVENT. DO NOT USE IN
AREAS WHERE SPARK OR OPEN FLAME ARE PRESENT.

Spill Release Procedures:REMOVE ALL SOURCES OF IGNITION. AVOID
INHALATION OF VAPORS. VENTILATE AREA. CLEAN UP WITH ABSORBENT
MATERIALS.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:STORE IN BLDG DESIGNED/PROTECTED FOR
STOR OF LIQ W/NFPA CLASS GIVEN BY OSHA CLASS. RECOM GROUND/BOUND OF
CONTR WHEN TRANSFERRING LIQ & POWDERS(SUPDAT)
Other Precautions:NONE KNOWN UNLESS OTHERWISE NOTED. CHRONIC OVEREXP
TO, AND MISUSE OF, SOLV HAS BEEN LINKED TO PERMANENT BRAIN &
NERVOUS SYSTEM DAMAGE.

Respiratory Protection:OUTDOOR/OPEN AREAS: W/UNRESTRICTED VENT, USE
NIOSH/MSHA APPRVD FILTER RESP TO REMOVE SOLID AIR-BORNE PARTICLES
OF OVERSPRAY DURING SPRAY APPLICATN. RESTRICTED AREAS: USE
NIOSH/MSHA APPROVED RESP I/A/W 29 CFR 1910.134 TO REMOVE (SUPDAT)
Ventilation:PROVIDE SUFFICIENT VENT, IN VOL & PATTERN, TO KEEP TLV &
LEL OF HAZ INGRED BELOW LIM SPECIFIED, & TO REMOVE (SUPDAT)
Protective Gloves:CHEMICAL RESISTANT GLOVES.
Eye Protection:CHEM WORK GOG & FULL LENGTH FSHLD.
Other Protective Equipment:IMPERVIOUS PROTECTIVE CLOTHING TO PREVENT
SKIN CONTACT.
Work Hygienic Practices:REMOVE AND WASH SOILED CLOTHING BEFORE REUSE,
WASH HANDS BEFORE EATING OR SMOKING.
Supplemental Safety and Health
FIRE FIGHT PROC: AS AN EXTING MEDIA. TAKE CARE TO PVNT SPREAD OF BURN
LIQ W/H2O. CLSD CONTR MAY EXPLODE WHEN EXPOS TO EXTREME HEAT.
HNDLG/STOR PREC: TO AVOID STATIC CHARGE BUILDUP. VENT: DECOMP PROD
D URING WELD/FLAME CUTTING ON SURF COATEDW/PROD. RESP PROT: A
COMBINATION OF PARTICULATES AND VAPOR.

HCC:F4
Boiling Pt:B.P. Text:>249F,121C
Vapor Pres:SEE INGRED
Vapor Density:HVR/AIR
Spec Gravity:1.13
Evaporation Rate & Reference:SLOWER THAN ETHER
Appearance and Odor:NONE SPECIFIED BY MANUFACTURER.
Percent Volatiles by Volume:37

Stability Indicator/Materials to Avoid:YES
OXIDIZING AGENTS.
Stability Condition to Avoid:STORE AWAY FROM DIRECT HEAT, FLAME OR
SPARK.
Hazardous Decomposition Products:CO, CO2, VARIOUS HYDROCAROBN
FRAGMENTS.

Waste Disposal Methods:DISPOSE IN ACCORDANCE WITH LOCAL, STATE, AND
FEDERAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.